Issue 2.0
SV9100 System Hardware Manual
4.
Remove chassis access panel from rear of chassis.
5.
Remove cabling from retention clips.
Figure 3-153 Chassis Access Panel Removed (19" Chassis)
6.
Remove two screws securing fan to access cover. Keep screws for
use when installing replacement fan [refer to
Access Panel Removed (19"
10.1.2 Install Cooling Fan
1.
Align replacement fan with holes and secure with two screws [refer to
Figure 3-153 Chassis Access Panel Removed (19"
2.
Install cabling into retention clips [refer to
Access Panel Removed (19" Chassis) on page
3.
Insert access panel hinges into slots on rear of chassis.
4.
Plug fan power cable into three prong plug [refer to
Opening Chassis Access Panel (19" Chassis) on page
5.
Reinstall access cover and secure with retaining screw (refer to
Figure 3-151 19" Chassis Access Panel on page
Figure 3-153 Chassis
Chassis)].
Chassis)].
Figure 3-153 Chassis
3-115].
Figure 3-152
3-114).
3-114].
3-115