Wm-L Unit; Mount Multiline Terminal On Wall Using Wm-L Unit; Figure 5-107 Wall Mount Spacing Guide (Wm-L Unit) - NEC Univerge SV9100 System Hardware Manual

Issue 2.0
5-98
5.2.8

WM-L UNIT

The WM-L UNIT (Wall Mount Unit) is used to attach any DT Series multiline
terminal to the wall. This unit connects to the bottom of the telephone.
When optional adapters are used, the multiline terminal must be installed on
the wall using the WM-L UNIT.
5.2.8.1

Mount Multiline Terminal on Wall using WM-L UNIT

Use the template shown in
Guide (WM-L UNIT) on page 5-98
drilling.

Figure 5-107 Wall Mount Spacing Guide (WM-L UNIT)

1.
Figure 5-107 Wall Mount Spacing
Attach the WM-L UNIT to the wall using six screws or, using
two wall mounted screws (refer to
WM-L UNIT Using Screws on page
Installing DT Series Digital and IP Multiline Terminals
for required spacing before
Figure 5-108 Attach
5-99).