Series Commissioning; Edit And Load *.Asd File - Bosch DM**8001 Series Parameter And Commissioning Manual

6

Series Commissioning

6.1

Edit and load *.asd file

Change parameter
1070 066 028-101 (01.05) GB
During series commissioning, all data backed up with 'IDN Backup' (cf.
page 4–11) after initial commissioning of a drive are loaded to and saved in
all other drives.
.
If your application involves drives with different settings, parameters
may be changed directly in the parameter file. Please observe the syn-
tax requirements when making changes.
Make sure that all of the hardware checks described in section 2 have been
L
properly carried out.
The *.asd file can only be opened in the main menu in order to be edited
with a file editor.
1. Select menu sequence FILE " OPEN " ASM FILE
The editor is started by hitting "OK" in the Open dialog:
Set file
2. Change the desired parameters in the actual file. Please observe the
syntax requirements when making changes.
Series Commissioning
6–1