Table of Contents
Advertisement
2
Prerequisites for Commissioning
1070 066 028-101 (01.05) GB
The installation and operation of the DSS requires general knowledge of the
Windows user interface (e.g. start/exit programs, open/save files, change
program windows, etc.).
In the present manual, we suppose that this knowledge is available.
CAUTION
Commissioning by insufficiently qualified personnel may cause
severe damage to the machine and drives or even personal injury!
Commissioning is therefore reserved to appropriately trained
D
technical personnel!
In the case of multi-axis systems, you should always commis-
D
sion a single drive at a time.
The motor must be properly fastened or flanged. If this is not
D
yet possible, you must fix the motor, e.g. with the help of suit-
able screw clamps, so as to ensure that it cannot move even
with maximum acceleration of the motor shaft.
Our service department will in any case be available for assistance. On
request, we also provide training for your personnel. For more information,
please contact us (phone (+49) 6062 78-0).
You should always use the DSS in order to adjust a drive to your application,
test it or optimize it.
The DSS is designed for PCs on which the Windowst operating system has
been installed.
Prerequisites for Commissioning
2–1
Hide quick links:
Advertisement
Table of Contents
