Table of Contents
Advertisement
When prompted, provide the security passcode and click OK.
d.
e.
View the list of wireless networks again and verify that the
client shows Connected. A connected status indicates that the
Wi-Fi client has been authenticated and automatically assigned
an IP address.
12. Verify connection from PCCU:
a.
Start a new instance of PCCU or close the current PCCU
connection. The main PCCU screen displays.
On the PCCU toolbar, click Setup.
b.
c.
On the Setup tab, for Communications/PCCU Connect Method,
select TCP/IP.
d.
In the Network ID or IP field, type the IP address assigned to the
XFC or XRC for the Wi-Fi network (default: 192.168.1.1).
Click Close to exit PCCU setup and return to the main PCCU
e.
screen.
On the PCCU toolbar, click Entry and verify connection is
f.
established.
Enable Bluetooth
The XFC and XRC support Bluetooth functionality to allow wireless local
access. This procedure enables onboard Bluetooth.
For additional details, or if using a USB dongle, click Help from the
Bluetooth tab screen or refer to the user manuals, see
information.
Enable onboard Bluetooth:
1.
Ensure the antenna has been installed. See
2.
Configure the Network ID. See section
communication.
On the Entry mode navigation tree, select Communications.
3.
Select the Bluetooth tab.
4.
For the Bluetooth mode, select On-board.
5.
Click Send.
6.
Click Yes to confirm. Wait for Bluetooth to initialize.
7.
Verify that the Bluetooth Status displays Ready.
8.
6 4 | XSE RI ES G5 STA RT UP GUI DE | 21 0 60 0 1MNAA
Additional
2.10 Install
10.3 Configure for network
antenna.
Advertisement
Table of Contents
