Configuration Of Pc Connection - Siemens S120 Instructions Manual

Figure 30 - STARTER language Selection
In order for the choice becomes operational, you must restart STARTER.
8.3

CONFIGURATION of PC CONNECTION

The instructions below are for Windows 7; for other versions of Windows, the concepts to be applied are the
same, although the screens and / or sequence may differ slightly.
1. Open Network and Sharing Center, and click Change adapter settings
Figure 31 - Change Windows settings tab
2. Select the door to which you connected the Ethernet cable to the inverter (in this case P1 - Intel(R)
82579LM) and then press the right button Properties.
Siemens S120_EN_rev06-08062017.docx 8-3