Sony Handycam DCR-VX2100E Operating Instructions Manual page 49

Recording a still image on a
tape – Tape Photo recording
Notes
• During tape photo recording, you cannot
change the mode or setting.
• The PHOTO button does not work:
– While the fader function is set or in use.
– While the digital effect function is set or in
use.
• Do not shake the camcorder during tape
photo recording. The recorded image may be
blurred.
To do tape photo recording using the
Remote Commander
Press PHOTO on the Remote Commander.
Your camcorder immediately records an image
on the LCD screen or in the viewfinder.
When you do tape photo recording during
normal CAMERA recording
You cannot check an image on the LCD screen
or in the viewfinder by pressing PHOTO
lightly. Press PHOTO deeper. The still image is
then recorded for about seven seconds and
your camcorder returns to standby mode.
When shooting a moving object in Tape
Photo recording
When playing back the image by another unit,
the image may be blurred. This is not a
malfunction.
49