Digital camcorders: digital handycam camcorder (2 pages)
Summary of Contents for Sony DCR-VX2100
Page 1
How to use UK Model Acrobat Reader Acrobat Reader Australian Model Chinese Model DCR-VX2100E E Model Hong Kong Model Tourist Model Photo : DCR-VX2100 DCR-VX2100/VX2100E C MECHANISM Link Link SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS SPECIFICATIONS BLOCK DIAGRAMS PRINTED WIRING BOARDS...
75 ohms, unbalanced 1.6 kg (3 lb 9 oz) 2 rotary heads Chrominance signal: including the rechargeable battery Helical scanning system DCR-VX2100: 0.286Vp-p pack, NP-F330 and cassette Audio recording system DCR-VX2100E: 0.3Vp-p DVM60 Rotary heads, PCM system 75 ohms, unbalanced...
Page 3
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
DCR-VX2100/VX2100E SECTION 1 SERVICE NOTE 1-1. NOTE FOR REPAIR Make sure that the flat cable and flexible board are not cracked of When remove a connector, don't pull at wire of connector. bent at the terminal. Be in danger of the snapping of a wire.
DCR-VX2100/VX2100E 1-2. SERVICE NOTE POWER SUPPLY DURING REPAIRS In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so that the unit cannot operate. These following two methods are available to prevent this. Take note of which to use during repairs.
DCR-VX2100/VX2100E 1-3. SELF-DIAGNOSIS FUNCTION SELF-DIAGNOSIS DISPLAY SELF-DIAGNOSIS FUNCTION When problems occur while the unit is operating, the counter of the When problems occur while the unit is operating, the self-diagnosis viewfinder, LCD screen or LCD window consists of an alphabet function starts working, and displays on the viewfinder, LCD screen and 4-digit numbers, which blinks at 3.2 Hz.
DCR-VX2100/VX2100E SELF-DIAGNOSIS CODE TABLE Self-diagnosis Code Block Detailed Symptom/State Correction Function Code Non-standard battery is used. Use the info LITHIUM battery. Condensation. Remove the cassette, and insert it again after one hour. Video head is dirty. Clean with the optional cleaning cassette.
DCR-VX2100/VX2100E NOTE: Follow the disassembly procedure in the numerical order given. 2-1. LCD SECTION (HL-013, PD-217 BOARDS, INVERTER TRANSFORMER UNIT) REMOVING THE PD-217 BOARD, INVERTER TRANSFORMER UNIT 2 Two screws (M2 × 3), 3 P cabinet (C) assembly 4 Harness...
DCR-VX2100/VX2100E 2-2. EVF SECTION (LB-100 BOARD) 2 EVF rear 4 EVF front cabinet (upper) cabinet assembly 1 Push the lock knob in the direction of the arrow A and remove the EVF rear cabinet assembly in the direction of the arrow B .
DCR-VX2100/VX2100E 2-5. CABINET (L) BLOCK ASSEMBLY, MECHANISM DECK, VC-358, DD-216, JK-267 BOARDS (FOR FORCE EJECT OF CASSETTE AND VTR SECTION CHECK) 3 Screw (M2 × 5), spring bolt 6 Cabinet (L) block assembly 1 Screw (FOR FORCE EJECT OF CASSETTE) (M2 ×...
Page 16
DCR-VX2100/VX2100E [MECHANISM DECK SERVICE POSITION-1] Note: Use the parts only which can be removed easily from outside of the mechanism deck. Adjustment remote commander (RM-95) CPC-13 jig Mechanism deck (J-6082-443-A) AC POWER AC IN ADAPTOR Cabinet (L) block assembly [SERVICE POSITION TO CHECK THE VTR SECTION] Connection to Check the VTR Section To check the VTR Section, set the VTR to the "forced VTR power ON"...
DCR-VX2100/VX2100E [CONNECTION DIAGRAM FOR SERVICE POSITION (Mainly for voltage measurement and check)] CK-140, VC-358, JK-267, CD-512, DD-216, LA-028, KP-013, MK-016, MS-209 BOARDS, MECHANISM DECK-2 Battery panel assembly AC POWER AC IN ADAPTOR CPC-13 jig DC-IN (J-6082-443-A) connector (3P) (1-794-637-21) Battery terminal board (4P)
Page 23
DCR-VX2100/VX2100E 2-15.CONTROL SWITCH BLOCK (ED-4980), HINGE ASSEMBLY Start the removal work after the LCD section has been removed referring section 2-1. 2 Control switch block (ED-4980) 1 Bright button 3 Blind door (D) assembly 2 Screw (M1.7 × 2.5), 2 Hinge lid...
DCR-VX2100/VX2100E 2-17.FLEXIBLE BOARDS LOCATION The flexible boards contained in the mechanism deck and that in the zoom lens are not shown. FP-193 FP-896 FP-895 FP-202 FP-893 FP-894 FP-194 FP-190 FP-196 FP-189 FP-188 FP-195 CONTROL SWITCH BLOCK FP-191 (ED-4980) CONTROL SWITCH BLOCK...
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS Link Link OVERALL BLOCK DIAGRAM (1/4) POWER BLOCK DIAGRAM (1/3) OVERALL BLOCK DIAGRAM (1/4) POWER BLOCK DIAGRAM (1/3) OVERALL BLOCK DIAGRAM (2/4) POWER BLOCK DIAGRAM (2/3) OVERALL BLOCK DIAGRAM (2/4) POWER BLOCK DIAGRAM (2/3) OVERALL BLOCK DIAGRAM (3/4)
Page 27
DCR-VX2100/VX2100E SECTION 3 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM (1/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. CD-512 BOARD VC-358 BOARD(1/4)
Page 28
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-2. OVERALL BLOCK DIAGRAM (2/4) CN300 VC-358 BOARD(2/4) Interface (6/18) (3/18) X301 24.576MHz...
Page 29
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-3. OVERALL BLOCK DIAGRAM (3/4) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. CN007 C MECHA DECK FOR ADJUSTMENTS (SEE PAGE 4-39)
Page 30
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-4. OVERALL BLOCK DIAGRAM (4/4) CONTROL FP-196 HL-013 BOARD CK-140 VC-358 BOARD(4/4) (15/18)
Page 31
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-5. POWER BLOCK DIAGRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. CHARGE INH DD-216 BOARD SHOE ON (4-61) SHOE UNREG...
Page 32
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. 3-6. POWER BLOCK DIAGRAM (2/3) VC-358 BOARD IC1104 (15/18) JK-267 BOARD CN021 HI CONTROL...
Page 33
DCR-VX2100/VX2100E 3. BLOCK DIAGRAMS 3. BLOCK DIAGRAMS 3-7. POWER BLOCK DIAGRAM (3/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. PD-217 BOARD PANEL 4.6V LCD901 PANEL 2.8V Q2102,2104 PANEL 13.5V...
DCR-VX2100/VX2100E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ...
(PAGE 4-43 of LEVEL3) R103 C105 4700 4.7u L105 100uH C108 R111 6.3V R110 NTSC MODEL;DCR-VX2100 C110 R105 4.7u 5600 PAL MODEL ;DCR-VX2100E IC105 Precautions Upon Replacing CCD imager BUFFER IC105 IC100 • The CD-512 board mounted as a repair part is not equipped AD8014ART-REEL7 with a CCD imager.
Page 40
DCR-VX2100/VX2100E 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS JK-267 PRINTED WIRING BOARD JK-267 PRINTED WIRING BOARD For Schematic Diagram • Refer to page 4-83 for printed wiring board. SIGNAL PATH JK-267 BOARD JACK BOARD VIDEO SIGNAL AUDIO XX MARK:NO MOUNT CHROMA...
DCR-VX2100/VX2100E 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR WIRING BOARDS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • Chip parts. • : Uses unleaded solder.
DCR-VX2100/VX2100E 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-5. MOUNTED PARTS LOCATION no mark : side A CD-512 BOARD JK-267 BOARD CK-140 BOARD PD-217 BOARD * mark : side B C100 * C301 CN250 E-3 C2101 Q2101 C-3 C101...
Page 76
DCR-VX2100/VX2100E 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS no mark : side A LA-028 BOARD SE-147 BOARD FK-088 BOARD MI-050 BOARD * mark : side B * C070 * IC070 * R107 * C600 CN500 D-1 C700 * C071...
DCR-VX2100/VX2100E NOTE NOTE 5. REPAIR PARTS LIST (1/2) TO (2/2) TO (2/2) NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS EXPLODED VIEWS Link Link...
Page 79
DCR-VX2100/VX2100E NOTE NOTE 5. REPAIR PARTS LIST (2/2) TO (1/2) TO (1/2) NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. ACCESSORIES ACCESSORIES CD-512 BOARD JK-267 BOARD...
Page 80
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. • Items marked “*” are not stocked since they are seldom required for routine The components identified by mark 0 or service.
Page 81
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1. EXPLODED VIEWS 5-1-1. OVERALL SECTION-1 ns : not supplied Upper handle section (See page 5-8) Cabinet (L) section (See page 5-5) Cabinet (R) section (See page 5-6, 5-7) Ref. No.
Page 82
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-2. OVERALL SECTION-2 ns : not supplied EVF section (See page 5-10) Mechanism deck (See page 5-13 to 5-15) Battery panel section (See page 5-9) Ref. No. Part No. Description Ref. No.
Page 83
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-3. CABINET (L) SECTION ns : not supplied Ref. No. Part No. Description Ref. No. Part No. Description X-3953-913-2 CABINET (L) ASSY 3-060-549-01 SHEET, EJECT 3-703-357-08 PIN (DIA. 1.6 SERISE) * 114...
Page 84
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-4. CABINET (R) SECTION-1 ns : not supplied LCD901 ND901 SP901 Cabinet (R) section-2 (See page 5-7) - 2 1 a r d LCD902 Ref. No. Part No. Description Ref. No.
Page 85
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-5. CABINET (R) SECTION-2 ns : not supplied Ref. No. Part No. Description Ref. No. Part No. Description X-3950-599-1 DOOR (D) ASSY, BLIND 3-060-636-21 BUTTON, R 3-060-795-01 TAPE, HARNESS FIXED 3-060-637-11 GRILLE, SPEAKER...
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-6. UPPER HANDLE SECTION ns : not supplied BT802 BT801 MIC902 MIC901 : BT801, BT802 (Lithium battery) ZM-030 board on the mount position. (See page 4-109) CAUTION : CAUTION : For the parts of 288: TAPE (A) (3-941-343-01) cut Danger of explosion if battery is incorrectly replaced.
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-7. BATTERY PANEL SECTION ns : not supplied BT901 Ref. No. Part No. Description Ref. No. Part No. Description A-7078-948-A MK-016 BOARD, COMPLETE 3-060-592-01 BRACKET (R), S BELT * 302 3-060-678-01 RETAINER, MK...
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-9. CENTER FRAME SECTION ns : not supplied Lens block section (See page 5-12) Ref. No. Part No. Description Ref. No. Part No. Description X-3953-917-1 FRAME ASSY, CENTER 1-678-056-31 FP-188 FLEXIBLE BOARD...
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-10. LENS BLOCK SECTION ns : not supplied (Including 3CCD IMAGER) Be sure to read “Precautions upon replacing CCD imager” on page 4-12 when changing the CCD imager. Ref. No. Part No.
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-12. TAPE GUIDE, PINCH SLIDER ASSEMBLY AND BRAKE SLIDER ASSEMBLY Included in Ref No. on page 5-15. Ref. No. Part No. Description Ref. No. Part No. Description 3-988-263-01 GEAR, RELAY 3-988-252-03 GEAR (S), GL...
DCR-VX2100/VX2100E 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5-1-13. EACH GEARS AND LOADING/CAPSTAN MOTOR ASSEMBLY ns : not supplied M903 S903 Q901 H901 D901 Q902 H902 CN901 S902 M902 S901 Ref. No. Part No. Description Ref. No. Part No.
DCR-VX2100/VX2100E CD-512 CK-140 5-2. ELECTRICAL PARTS LIST Ref. No. Part No. Description Ref. No. Part No. Description A-7078-938-A CD-512 BOARD, COMPLETE < RESISTOR > ********************** (IC100,IC101,IC102 are not included in this completed board.) R100 1-218-962-11 RES-CHIP 5.6K 1/16W (IC100,IC101,IC102 are included in PRISM ASSY.)
Page 106
DCR-VX2100/VX2100E Checking supplied accessories. Make sure that the following accessories are supplied with your camcorder. Shoulder strap (1) Eye cup (1) 3-987-015-01 3-087-515-01 AC Adaptor (1) 0 1-477-533-51 Battery case (3-053-056-01) Wireless Remote Commander (1) 2-pin conversion adaptor (1) (RMT-811)