Charging The Battery Pack - Sony Handycam DCR-VX2100E Operating Instructions Manual

Step 1 Preparing the power
supply

Charging the battery pack

Use the battery pack after charging it.
Your camcorder operates only with the
"InfoLITHIUM" battery pack (L series).
(1) Open the DC IN jack cover and connect the
AC Adaptor supplied with your camcorder
to the DC IN jack with the plug's v mark
facing toward the LCD panel side.
(2) Connect the mains lead to the AC Adaptor.
(3) Connect the mains lead to the wall socket.
(4) Set the POWER switch to OFF (CHG).
Charging begins.
The remaining battery time is indicated in
minutes on the display window.
When the remaining battery indicator changes
to u, normal charge is completed. To fully
charge the battery (full charge), leave the
battery pack attached for about one hour after
normal charge is completed until FULL
appears on the display window. Fully
charging the battery allows you to use the
battery longer than usual.
1
14
(1)
(2)
(3)
(4)
u
v
4
POWER