Sony Handycam DCR-VX2100E Operating Instructions Manual page 159

Changing the menu settings
Icon/item Mode
FRAME REC
z OFF
INT. REC
z OFF
HiFi SOUND
z STEREO
AUDIO MIX —
A/VtDV OUT z OFF
NTSC PB
z ON PAL TV
LCD B. L. z BRT NORMAL
LCD COLOUR
VF B.L.
z BRT NORMAL
GUIDEFRAME z OFF
Notes on LCD B.L. and VF B.L.
• When you select "BRIGHT," battery life is reduced a little during recording.
• When you use power sources other than the battery pack, "BRIGHT" is automatically selected.
Meaning
Does not make a cut recording.
ON Makes a cut recording (p. 89).
ON Makes an interval recording (p. 85).
Does not make an interval recording.
SET Sets the interval time and recording time.
To play back a stereo tape or dual sound track tape
with main and sub sound (p. 212).
1 To play back a stereo tape with the left sound or a
dual sound tape with main sound.
2 To play back a stereo tape with the right sound or a
dual sound track tape with sub sound.
To adjust the balance between the stereo 1 and
stereo 2 (p. 141).
To output analog images in digital format using
your camcorder.
ON To output digital images in analog format using
your camcorder.
To play back a tape recorded on your camcorder on
a PAL system TV.
NTSC 4.43 To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode.
To set the brightness on the LCD screen to normal.
BRIGHT To brighten the LCD screen.
— To adjust the colour on the LCD screen with the
SEL/PUSH EXEC dial.
To get low-
intensity
To set the brightness on the viewfinder screen to
normal.
BRIGHT To brighten the viewfinder screen.
Does not display the guide frame.
ON Displays the guide frame (p. 53).
ST1 ST2
To get high-
intensity
(continued on the following page)
POWER switch
CAMERA
CAMERA
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY
159