Sony Handycam DCR-VX2100E Operating Instructions Manual page 251

Identifying the parts and
controls
ug MIC jack (PLUG IN POWER) (p. 137)
The MIC jack is used to supply the power
to the "plug-in-power" microphone
connected, and is used as an audio input
jack for an external microphone or audio
equipment. When connecting an external
microphone, set the MIC/LINE switch to
MIC, and when connecting audio
equipment, set it to LINE.
uh Microphone (p. 139)
uj S VIDEO jack (p. 46, 107, 130, 189)
uk VIDEO jack (p. 46, 107, 130, 189)
ul AUDIO L/R jack (p. 46, 107, 130, 139)
i; DV Interface (p. 109, 132, 190)
This "i.LINK" mark is a trademark of Sony
Corporation and indicates that this
product is in agreement with IEEE 1394-
1995 specifications and their revisions.
The DV Interface is i.LINK compatible.
ia LANC jack
LANC stands for Local Application
Control Bus System. The
jack is used for controlling the tape
transport of video equipment and
peripherals connected to it. This jack has
the same function as the jack indicated as
CONTROL L or REMOTE.
is i (headphones) jack
When you use headphones, the speaker on
your camcorder is silent.
ug
uh
uj
uk
ul
i;
LANC control
ia
is
i
251