Sony Handycam DCR-VX2100E Operating Instructions Manual page 126

Dubbing only desired scenes
– Digital program editing
Operation 2: Performing a
digital program editing
(Dubbing a tape)
Make sure your camcorder and VCR are
connected, and that the VCR is set to recording
pause. When you use an i.LINK cable, you do
not have to set the VCR to recording pause.
When you use a video camera recorder, set its
POWER switch to VCR.
(1) Select VIDEO EDIT. Turn the SEL/PUSH
EXEC dial to select START, then press the
dial.
(2) Turn the SEL/PUSH EXEC dial to select
EXECUTE, then press the dial.
The camcorder automatically searches for
the beginning of the first program, then
starts dubbing.
The EXECUTING indicator flashes.
The SEARCH indicator appears during
search, and the EDIT indicator appears
during edit on the LCD screen or in the
viewfinder.
The program marks light up after dubbing
is complete.
When the dubbing ends, your camcorder
and the VCR automatically stop.
To stop dubbing
Press x on this camcorder or on the Remote
Commander.
To end the digital program editing function
Your camcorder stops when the dubbing is
complete. Then the display returns to VIDEO
EDIT in the menu settings.
Press MENU to end the digital program
editing function.
126
(1)
(2)
x