Sony Handycam DCR-VX2100E Operating Instructions Manual page 133

Recording video or TV
programs
When you have finished recording
x
Press x on both your camcorder and the VCR.
Using the Remote Commander
In step 5, press z REC and MARK
simultaneously, then immediately press X.
And in step 7, press X at the scene from which
z
you want to start recording.
X
X
Note
Your camcorder can only record PAL source.
For example, French video or TV programs
(SECAM) cannot be recorded correctly. See
page 233 for details on TV colour systems.
If you use a 21-pin adaptor to input PAL
source, you need a dual direction 21-pin
adaptor (optional).
You can connect only one VCR using the
i.LINK cable
When you dub a picture in digital form
The colour of the display may be uneven.
However this does not affect the dubbed
picture.
If you record a still picture in playback
pause mode via the DV Interface
The recorded picture becomes rough. And
when you play back the picture using your
camcorder, the picture may jitter.
Before recording
Press DISPLAY and make sure that the DV IN
indicator appears on the LCD screen or in the
viewfinder. The DV IN indicator may appear
on both pieces of equipment.
On the commander mode
Your camcorder works in the commander
mode, VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from
other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in
the commander mode VTR 2, we recommend
changing the commander mode or covering
the sensor of the VCR with black paper.
133