Sony Handycam DCR-VX2100E Operating Instructions Manual page 127

Dubbing only desired scenes
– Digital program editing
When the operations of the VCR do not
work with an i.LINK cable
Keep the i.LINK connection, and carry out
Preparation 2 (p. 112) again.
You cannot record on the VCR when:
• The cassette is not inserted.
• The tape has run out.
• The write-protect tab is set to the protect
position.
• The IR SETUP code is not correct. (When IR
is selected.)
• The setup to cancel recording pause is not
correct (p. 116). (When IR is selected.)
NOT READY appears on the LCD screen
when:
• The program to operate the digital program
edit has not been made.
• i.LINK is selected but an i.LINK cable is not
connected. (When i.LINK is selected.)
• The power of the connected VCR is not
turned on.
127