Saving The Configuration Changes; Rebooting The Espace 6850 Remotely - Huawei eSpace 6850 User Manual

EchoLife User Manual
Field Description
Time Zone This parameter controls the date and time display according to
the specified time zone. If the DHCP Option 2 is enabled, the
DHCP server overrides and centrally controls the setting of
Time Zone in the phone. The feature functions on the phone
only when you set the NTP server correctly.
LCD Backlight This parameter is set for adjusting the LCD brightness of the IP
Brightness phone in active and idle states. The value ranges from 0 to 8.
LCD Contrast LCD contrast, The value ranges from 0 to 20.
Time Display The LCD time is displayed in 12-hour or 24-hour format.
Format
Disable in-call The default value is No. If the parameter is set to Yes, the
DTMF display DTMF digits that are pressed during the call will not be
displayed on the LCD for security reasons.
Disable Missed The default value is No. By default, the LCD backlight is on
Call Backlight when a missed call exists.
HEADSET Key Select default answering or dialing mode as the headset mode.
Mode When selecting a default mode, press HEADSET to enter the
headset dialing status. If you press HEADSET when setting
Toggle Headset/Speaker, the headset icon is displayed on the
LCD. In this case, press
call in Headset mode.

Saving the Configuration Changes

After changing the settings, click Update on the bottom of the page to save the change.
If you want to change an item after submitting the setting, click a tab to access the
configuration page. Then click Reboot to reboot the phone, and all the changes take
effect.

Rebooting the eSpace 6850 Remotely

Click Reboot in the configuration menu to reboot the eSpace 6850 remotely. Wait 60
seconds to log in again.
4 Configuring the eSpace 6850
, you can make a call or answer a
21