Saving The Configuration Changes - Huawei eSpace 6805 User Manual

Huawei IP Phone eSpace
User Manual
Field
LCD Backlight
Brightness
LCD Contrast
Time Display
Format
Disable in-call
DTMF display
Disable Missed Call
Backlight
HEADSET Key
Mode
Call History Flash
Writing

Saving the Configuration Changes

After changing the settings, click Update on the bottom of the page to save the change.
If you want to change an item after submitting the setting, click a tab to access the
configuration page. Then click Reboot to reboot the phone, and all the changes take
effect.
68105
Description
This parameter is set for adjusting the LCD brightness of the
IP phone in active and idle states. The value ranges from 0 to
8.
LCD contrast. The value ranges from 0 to 20.
The LCD time is displayed in 12-hour or 24-hour format.
The default value is No. If the parameter is set to Yes, the
DTMF digits that are pressed during the call will not be
displayed on the LCD for security reasons.
The default value is No. By default, the LCD backlight is on
when a missed call exists.
Select default answering or dialing mode as the headset
mode. When selecting a default mode, press HEADSET to
enter the headset dialing status. If you press HEADSET
when setting Toggle Headset/Speaker, the headset icon is
displayed on the LCD. In this case, press
a call or answer a call in Headset mode.
This parameter is set for configuring the duration of
recording data of Call History, Phone Book, and Settings on
the Web configuration page into flash memory.
Write Timeout

Write timeout indicates that the duration of flash writing. The
range is 30-3600, in seconds. The default value is 300s.
Max Unsaved Log

This parameter is set for adjusting the max flash writing items
during the recording duration. The range is 0-500. 0 means
this option is disabled.
Do not change the value optionally. Consult the enterprise
administrator before any change.
22
4 Configuring the eSpace 6805
, you can make