Answering A Call; Do-Not-Disturb; Call Waiting/Call Holding - Huawei eSpace 6850 User Manual

EchoLife User Manual
The following is an example.
10.10.10.2 calls 10.10.10.3 — dial #3, followed by SEND.
10.10.10.2 calls 10.10.10.23 –– dial #23, followed by SEND.
10.10.10.2 calls 10.10.10.123 –– dial #123, followed by SEND.
If the SIP server is configured, a direct IP-IP call still works. If you use the
STUN, the direct IP-IP call also uses the STUN. Set Use Random Port to
No when completing direct IP calls.

Answering a Call

An incoming call: The phone rings. The corresponding account LINEx blinks. Pick
up the handset, press
answer the call.
Multiple incoming calls: The call waiting tone is played. The next available line
will blink in red. Answer an incoming call by pressing the LINEx key.

Do-Not-Disturb

To block all incoming calls, you can enable the Do-Not-Disturb (DND) function. The
phone will not ring when an incoming call comes.
Use either of the following methods to enable DND function:
Method 1: When the phone is in idle mode, press DND to enable the DND function and
press DND again to disable the DND function.
Method 2: Toggle the DND function as follows:
Step 1
Press MENU.
Step 2
Select Preference by pressing the arrow keys, and then press MENU.
Step 3
Select Do Not Disturb by pressing the arrow keys and press MENU.
Step 4
Select Enable DND or Disable DND and press MENU.

Call Waiting/Call Holding

Hold: Keep a call on hold by pressing HOLD.
Resume: Resume the call by pressing the corresponding LINEx key with a blinking
LED.
Multiple calls: Automatically keep an active call on hold by selecting another
available LINEx key or answering another call. If an incoming call comes when all
lines are in use, the call waiting tone (discontinuous tone) is displayed.
, enable the headset, or press the blinking LINEx key to
27
5 Using the eSpace 6850