Huawei eSpace 6850 User Manual page 21

EchoLife User Manual
Menu Configuration Description
Config Display the configuration submenus.
[SIP]
Set the SIP server for each account, including account, SIP
proxy, Outbound proxy, SIP user ID, SIP Auth ID, SIP
password, SIP transport, and Audio CODECs.
[Upgrade]
Configure the firmware server and the file download server.
Select either TFTP or HTTP to upgrade the firmware or
configure the phone.
[Factory Reset]
Type the MAC address on back of the phone. Press OK
softkey to restore the factory reset settings. Factory reset
clears all configurations and restores the phone to factory
settings.
[Layer 2 QoS]
Configure the 802.1Q/VLAN tag and 802.1P priority.
Press LEFT or select Back to return to the main menu.
Factory
These items are used for factory testing and not recommended for
Functions
users.
[Audio Loopback]
Speak to the handset. If you hear your voice in the handset,
your audio works well. Press MENU to exit the mode.
[Diagnostic Mode]
All LEDs are on. Press any key on the keypad to display the
key name on the LCD. Pick up the handset or press MENU to
exit the diagnostic mode.
Press LEFT or select Back to return to the main menu.
Enable or disable the DHCP protocol. Set the IP address, subnet
Network
mask, and gateway address by using the keypad if the static IP
mode is selected.
Reboot Reboot the device.
Exit Exit the menu.
4 Configuring the eSpace 6850
15