Three-Way Conference Call; Voice Messages - Huawei eSpace 6850 User Manual

EchoLife User Manual

Three-Way Conference Call

eSpace 6850 can host conference calls and support three-way conference calls.
Initiating a Conference Call
Step 1
Pick up the handset, press
to establish a call.
Step 2
Press another available LINE key to wait for the dial tone. Dial the phone
number of the third party and press SEND. If the call is established, press
CONF to initiate a three-way conference call. If the call is not established,
press LINEx key to resume the previous call.
Step 3
Press the previous LINE key to enable the call to join the conference.
Ending a Conference Call
Press HOLD to pause the conference call and put all parties on hold. If you want to
speak to an individual party, select the corresponding blinking LINEx key.
If the caller hangs up, the other two parties hang up automatically and the conference
ends. If either the second party or the third party hangs up, the rest two parties establish
the two-way conversation.
If both the second party and the third party hang up, the caller will hang up
automatically. In this case, the conference ends.

Voice Messages

A blinking red message waiting indicator (MWI) indicates a message is waiting. This
function takes effective only when the Subscribe for MWI field is set to Yes. The
default value is No. Press the
response (IVR) system prompts the user to retrieve the message. Press a specific
LINEx to retrieve messages for a specific line account.
Each line has a separate voice mail account. Each account requires a voice
mail portal number to be configured through the Voice Mail User id field.
The ways to check voice messages are as follows:
Press to check the voice message of the primary account.
Check each line for waiting tone (discontinuous).
, or enable the headset by pressing HEADSET
key to retrieve the message. The interactive voice
29
5 Using the eSpace 6850