Saving The Configuration Changes; Rebooting The Espace 6830 Remotely - Huawei V100R001C02 User Manual

Huawei IP Phone eSpace 6830
User Manual
Field
Disable in-call DTMF
display
Disable Missed Call
Backlight
HEADSET Key Mode
Call History Flash
Writing

4.3.1 Saving the Configuration Changes

After changing the settings, click Update on the bottom of the page to save the change. If you
want to change an item after submitting the setting, click a tab to access the configuration
page. Then click Reboot to reboot the phone, and all the changes take effect.

4.3.2 Rebooting the eSpace 6830 Remotely

Click Reboot in the configuration menu to reboot the eSpace 6830 remotely. Wait 60 seconds
to log in again.
Issue 01 (2011-09-07)
Description
The default value is No. If the parameter is set to Yes, the
DTMF digits that are pressed during the call will not be
displayed on the LCD for security reasons.
The default value is No. By default, the LCD backlight is on
when a missed call exists.
Select default answering or dialing mode as the headset mode.
When selecting a default mode, press HEADSET to enter the
headset dialing status. If you press HEADSET when setting
Toggle Headset/Speaker, the headset icon is displayed on the
LCD. In this case, press
call in Headset mode.
This parameter is set for configuring the duration of recording
data of Call History, Phone Book, and Settings on the Web
configuration page into flash memory.
 Write Timeout
Write timeout indicates that the duration of flash writing.
The range is 30-3600, in seconds. The default value is 300s.

Max Unsaved Log
This parameter is set for adjusting the max flash writing
items during the recording duration. The range is 0-500. 0
means this option is disabled.
Do not change the value optionally. Consult the enterprise
administrator before any change.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the eSpace 6830
, you can make a call or answer a
17