Switching The Ice Cube Maker On/Off; Making A Large Quantity Of Ice Cubes; Changing The Size Of The Ice Cubes - Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions

Switching the ice cube maker
on/off
The ice cube maker can be switched
off independently of the freezer
section if you do not want the
appliance to make any ice cubes.
Clean the ice cube tray if the ice
cube maker is going to be switched
off for a long period of time.
 Open the ice cube drawer slightly.
 Press the On/Off button  on the ice
cube maker
– until the indicator light lights up. The
ice cube maker is switched on.
– until the indicator light goes out. The
ice cube maker is switched off.
Ice cubes can only be made when the
ice cube drawer is closed completely.
 Close the ice cube drawer.
Making ice cubes
Making a large quantity of ice
cubes
The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer section. The
lower the temperature, the more ice
cubes are produced within a certain
time frame. At a temperature of -18 °C,
approx. 1 kg of ice cubes will be
produced within 24 hours.
Ice cube production stops automatically
when the ice cube drawer is full.
Useful tip: If you require a large amount
of ice cubes, replace the full ice cube
drawer with the drawer beside it on the
right.
The ice cube maker will begin to
produce ice cubes again as soon as
this new drawer has been placed in
position and closed properly.
Changing the size of the ice
cubes
The size of the ice cubes depends on
the quantity of water being taken in.
You can set this quantity according to
your wishes. To make larger ice cubes,
increase the amount of water being
taken in by the ice cube maker. The
factory default setting for the amount of
water is medium (E 3).
Instructions for how to set the water
intake time of the ice cube maker can
be found in the section "Changing the
size of the ice cubes".
45