– Leaving the finger on the sensor
changes the temperature
continuously. Once the highest or
lowest temperature value has been
reached the sensor or ,
respectively, will go out.
Approximately 5 seconds after the last
time a sensor has been touched, the
display automatically reverts to showing
the actual mean temperature inside the
freezer section.
When you have adjusted the
temperature, wait for approx. 6 hours if
the appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display. It will take this long for the
appliance to give an accurate reading.
If, after this time, the temperature is still
too high or too low, adjust it again.
Temperature range
The temperature in the freezer section
can be set from -14 °C to -28 °C.
The ambient temperature in the room
and the installation location can
affect the time it takes for the
appliance to reach the lowest
temperature.
If the ambient temperature is too
high, the appliance may not reach
the lowest temperature.
The correct temperature
Temperature display
During normal operation the
temperature displays on the control
panel show the temperature in the
middle of the PerfectFresh zone and
the temperature in the warmest part of
the freezer section.
25