Switching The Ice-Cube Maker On And Off; Making A Large Amount Of Ice Cubes - Miele KFN 37452 iDE Operating And Installation Instructions

Making ice cubes
Switching the ice-cube maker
on and off
Make sure that the ice-cube drawer is
empty before switching on the ice-
cube maker.
 Touch the settings button.
All symbols available for selection will
appear in the display and the  symbol
flashes.
 Touch the buttons for setting the
temperature (or ) repeatedly until
the the ice-cube maker symbol 
flashes in the display.
 Touch the OK button to confirm your
selection.
 Use the  and  buttons to set the
ice-cube maker:
0: ice-cube maker is switched off
1: ice-cube maker is switched on
 Touch the OK button to confirm your
selection.
The selected setting is applied.
 Touch the settings button to leave
settings mode or
 close the appliance door.
Otherwise, the appliance will switch to
normal operation after approximately
one minute.
58
Making a large amount of ice
cubes
The amount of ice cubes produced
depends on the temperature in the
freezer. The lower the temperature, the
more ice cubes are produced within a
given time. At a temperature of -18 °C,
approx. 1 kg of ice cubes will be
produced within 24 hours.
Tip: If you require a large amount of ice
cubes, replace the full ice cube drawer
with the drawer beside it on the right.
The ice maker will begin to produce ice
cubes again as soon as this drawer has
been placed in position and closed
properly.