Adjusting The Interior Fittings; Moving The Adjustable Shelves; Moving Split Shelves; Removing The Perfectfresh Zone Drawers - Miele KFN 14827 SDE ed/cs-2 Operating And Installation Instructions

Moving the adjustable shelves

The shelves can be adjusted according
to the height of the food.
 Raise the shelf and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upward to
prevent food from touching the back of
the appliance and freezing to it.
Stoppers prevent the shelves from
being dislodged by mistake.

Moving split shelves

In order to accommodate tall items in
the appliance such as bottles or large
containers, one of the shelves is
divided. The front section can be
pushed carefully under the rear section:
 Push the rear half of the glass shelf
slightly upwards.
 With the rear half pushed up, lift the
front half of the glass shelf up slightly
at the front, then slide it carefully
underneath the rear half.
 To move the split shelf to another
level take both sections out of the
appliance.

Adjusting the interior fittings

 Then place the two support rails on
the left and right support ribs at the
desired height and
 slide the two glass plates in one after
the other.
The section with the raised edge must
be fitted at the back.
Removing the PerfectFresh
zone drawers
The drawers in the PerfectFresh zone sit
on telescopic runners and can be
removed for loading, unloading or
cleaning purposes:
 Pull the drawers out as far as they will
go.
 Holding the sides of the drawer at the
back, lift it up and then pull it
forwards and out.
Push the runners back in to avoid
injury or damage.
37