3.10.8
Program control during simulation
3.10.8.1
Changing the feedrate
You can change the feedrate at any time during the simulation.
You can track the changes in the dialog line.
Note
If you are working with the "Simultaneous recording" function, the override rotary switch on
the control panel is used.
Procedure
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
1.
Simulation is started.
2.
Press the "Program control" softkey.
3.
Press the "Override +" or "Override -" softkey to increase or decrease
the feedrate by 5%.
- OR -
Press the "Override 100%" softkey to set the feedrate to the maximum
value.
- OR -
4.
Press the "<<" softkey to return to the main screen and perform the
simulation with changed feedrate.
Machine the workpiece
3.10 Simulating machining
109