Siemens SINUMERIK 840D sl Operating Manual page 126

User data
4.3 Displaying global user data (GUD)
GUDs are defined in files with the ending DEF. The following file names are reserved for this
purpose:
File name
MGUD.DEF
UGUD.DEF
GUD4.DEF
GUD8.DEF, GUD9.DEF
Proceed as follows
...
...
Note
After each start-up, a list with the defined UGUD variables is displayed in the "Global user
data" window.
126
Description
Definitions for global machine manufacturer data
Definitions for global user data
User-definable data
User-definable data
1. Select the "Parameter" operating area.
2. Press the "User variable" softkey.
3. Press the "Global GUD" softkeys.
The "Global user data" window is displayed. A list of the defined
UGUD variables will be displayed.
- OR -
Press the "GUD selection" softkey and the "SGUD" to "GUD6"
softkeys if you want to display GUD 1 to GUD 6 of the global user
data.
- OR -
Press the "GUD selection" and ">>" softkeys as well as the "GUD7" to
"GUD9" softkeys if you want to display GUD 7 to GUD 9 of the global
user data.
...
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal