Siemens SINUMERIK 840D sl Operating Manual page 28

Introduction
1.4 Operator interface
Selecting parameters
Some parameters require you to select from a number of options in the input field. Fields of
this type do not allow you to type in a value.
The selection symbol is displayed in the tooltip:
Associated selection fields
There are selection fields for various parameters:
● Selection of units
● Changeover between absolute and incremental dimensions
Procedure
28
1. Keep pressing the "SELECT" key until your preferred setting or unit is
selected.
The "SELECT" key only works if there are several selection options
available.
- OR -
Press the "INSERT" key.
The selection options are displayed in a list.
2. Select the desired setting with the "Cursor down" and "Cursor up"
keys.
3. If required, enter a value in the associated input field.
4. Press the "INPUT" key to finish the parameter input.
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
HMI sl Universal