Siemens SINUMERIK 840D sl Operating Manual page 157

Icons in the tool list
Icon/
Designation
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Additional data
The following tool types require geometry data that is not included in the tool list display.
Tool type
111 Conical ballhead cutter
121 End mill with corner
rounding
130 Angle head cutter
131 Angle head cutter with
corner rounding
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Additional parameters
Corner radius
Corner radius
Geometry length (length X, length Y, length Z)
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Geometry length (length X, length Y, length Z)
Corner radius
Wear length (Δ length X, Δ length Y, Δ length Z)
Adapter length (length X, length Y, length Z)
V (direction vector 1 - 6)
Vector X, vector Y, vector Z
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Tool management
6.5 Tool list
157