Siemens SINUMERIK 840D sl Operating Manual page 23

Maximize display
Overview of display
Display
Header columns
WCS/MCS
Item
Display of distance-to-go
Feed/override
Repos offset
Footer
See also
Overview - Work offsets (Page 50)
HMI sl Universal
Operating Manual, 01/2008, 6FC5398-6AP10-2BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Press the ">>" and "Zoom act.val." softkeys.
Meaning
Display of axes in selected coordinate system.
Position of displayed axes.
The distance-to-go for the current NC block is displayed while the
program is running.
The feed acting on the axes, as well as the override, are displayed
in the full-screen version.
The distances traversed in manual mode are displayed.
This information is only displayed when you are in the "Repos"
submode.
Display of active work offsets and transformations.
The T, F, S values are also displayed in the full-screen version.
Introduction
1.4 Operator interface
23