Mitsubishi Electric AG-150A Instruction Book page 76

8-1-1 Setting of outside temperature interlock function
To use outside temperature interlock function, touch [Function 1] on the menu bar on the setting change window, and then touch [Ext
Temp Interlock] tab. In this window, outside temperature measuring unit and control level for each group can be set.
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Sensor button
Control level button
(No control)
8-1-2 Selecting of outside temperature measuring unit
Outside temperature measuring unit must be selected to use this function. Press [Sensor] button, then Ext Temp Sensor window
appears as shown below.
8-1-3 Setting the control level
After selecting the outside temperature measuring unit, control level for each group can be set in the Ext Temp Interlock window.
For groups that use outside temperature interlock function, select [+1°C/+2°F], [+2°C/+4°F], [+3°C/+6°F], [+4°C/+8°F] button depending
on the control level. For groups that does not need this function, touch [None]. (An orange frame will appear around the selected button.)
Touch [Save settings] button to reflect the changes immediately.
Select an outside temperature measuring unit used for the interlock
function, then press OK.
(An orange frame will appear around the selected button.)
The selected unit will be displayed on the Ext Temp Interlock window.
To cancel the selected unit, select [-- --] and then touch OK.
– 75 –
Control level buttons
(Level 1-4)
Save settings button
Control level button
(Level 1-4)