Mitsubishi Electric AG-150A Instruction Book page 79

Air-conditioner control system, centralized controller

Hide thumbs Also See for AG-150A:

Table of Contents

8-2-3

Setting of lower/upper limit temperature

After setting the time period, lower/upper limit temperature for each group can be set.

Touch lower/upper limit temperature setting button to show the window below.

Set the temperature by pressing  button. When [--] is set, setback

control will not be operated. After setting, press OK to reflect the

setting. Setback setting window will be shown. If the temperature is

not changed, touch [Cancel].

Note: The setting : lower limit temperature < upper limit temperature

Note: The settable temperature varies depending on the model.

Note: When CITY MULTI S Series (PUMY) is used, set the

temperature at 17°C/63°F or above in heating mode.

After setback setting window is shown, check the changed items.

Touch [Save settings] button to reflect the changes immediately.

– 78 –

Lower/Upper limit

temperature setting

button

Table of Contents