User Operation - Mitsubishi Electric AG-150A Instruction Book

6. User operation

The following screens are used under user operation.
• Floor layout/block display screens .......................... Displays the operation status (ON/OFF) and error status of the air conditioning
• Air conditioning system operation setting screen .... Use to perform collective or individual group operation (ON/OFF, operation
Accessing the Floor layout, Block display, and Air conditioning unit operation setting screens
Block button
Floor layout (simplified icons)
Press [Block].
Floor button
Block display
Refer to Section 6-1 "Operation condition
monitoring" (P 24).
system
This is the screen that is normally used.
mode, air flow direction, fan speed, temperature setting, timer enable/disable,
prohibition/permission of operation from local remote controller, filter reset,
room temperature display).
Zoom-in button
Press
[
Press
[
Press [Block].
Press [Floor].
Select a group and
press [Operate].
Press [OK] or
[Cancel].
(Applicable only
when the operation
screen is accessed
from the Block
display screen)
Operation
button
Refer to Section 6-1 "Operation condition
monitoring" (P 24).
]
]
Floor layout (detailed icons)
Press [OK] or
[Cancel].
(Applicable only
when the operation
screen is accessed
from the Floor
display screen)
Refer to Section 6-2 "Adjusting Indoor Unit
Operations" (P 27).
– 23 –
Zoom-out button
Operation button
Select a group and
press [Operate].
OK button Cancel button
Air conditioning unit
operation screen