Panasonic EBL512 Operating Instructions Manual page 47

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: -
15.2.2.2
15.2.2.3
15.2.2.4
15.2.2.5
Operating Instructions Fire alarm system EBL512, V2.7.x
Second row: All fire alarms, also several alarm points in one zone,
will be displayed in zone - address order (i.e. up to 15360 alarms).
Press "A". E.g.:
ZONE: 123
Point: 123-45
Point: Zone-address for alarm no. 00001.
""
ZONE: 123
Point: 234
Point: Zone no. for alarm no. 00002.
...and so on.
Display faults (X2)
ZONE: 123
Display faults
Press "A". E.g.:
ZONE: 123
FAULT: Battery not connected CU xx
Only the fault message, for the fault respectively, is displayed here,
not date, time and "status" information.
Display disablements (X3)
ZONE: 123
Display disablements
Press "A". E.g.:
ZONE: 123
Zone XXX address XX disabled
Disable zone (X4)
ZONE: 123
Disable zone
Press "A". E.g.:
ZONE: 123
Disable zone: 000
Write zone number and press "A". If more zones are to be disabled,
repeat the procedure.
Re-enable zone (X5)
ZONE: 123
Re-enable zone
Press "A". E.g.:
45
LAST: 789 No.: 003
00001 of 00005
LAST: 789 No.: 003
00002 of 00005
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
ACCEPT?
LAST: 789 No.: 003
ACCEPT?
X2
X3
X4
X5