Bs4 Loop; Control Unit / C.u. / C.i.e; Fire Brigade Panel (Fbp); Control Panel (Cp) - Panasonic EBL512 Operating Instructions Manual

Fire alarm system ebl512
Hide thumbs Also See for EBL512:
Table of Contents

Advertisement

Panasonic Eco Solutions Nordic AB
MEW01457
Rev: -
2.8
2.9
2.10
2.11
2.12
2.13
Operating Instructions Fire alarm system EBL512, V2.7.x

BS4 loop

Loop = a cable, with two wires, to which all the addressable Autronica
(BS100) units can be connected. Starts in the c.i.e. and it returns back
to the c.i.e.

Control Unit / C.U. / C.I.E.

Control Unit = Control and Indicating Equipment = Unit to which the
alarm points are connected (via a COM loop). Indicates fire alarm,
fault condition, etc. Fire Brigade Panel & Control Panel (see below)
included or not included. Printer included or not included.

Fire Brigade Panel (FBP)

Unit intended for fire alarm presentation, etc. for the fire brigade
personnel. Can be a part of the control unit (front) or a separate unit
(external FBP).
In the ext. FBP, a printer can be included or not included.

Control panel (CP)

A part of the control unit (front), intended for the building occupier,
service personnel, etc., to "communicate" with the control unit /

system.

System
Several control units connected via a TLON network (co-operating
control units).

Network / TLON

Node / TLON Conn. board / Gateway / Sub
net / Backbone net / Router / Repeater
Brief explanations to the words/expressions to be found in connection
with a "network". See also separate TLON Technical description.
®
TLON
= TeleLarm Local Operating Network = a LonWorks
2
network
for communication between several units/nodes.
protocol is LonTalk and the transmission works with doubly-
terminated bus topology (Echelon FTT-10). To connect a control unit
to the network, a TLON connection board is plugged in the control
unit. (Old installations: Some control units, not prepared for network
connection, could be connected via a serial interface and a Gateway).
A network can be one sub net (FTT-10) or several sub nets, connected
via routers. (In the TLON Network a sub net = a channel.)
Repeaters are used to increase the maximum cable length, node to
node, in a network.
2
®
LonWorks
= A "summing-up-name" for the market of Echelon
Corporation Inc. technology.
10
®
®
/ LonWorks
/ Echelon /
®
- based
The

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents