Disable Or Re-Enable Outputs For Routing Equipment (H8/S1) - Panasonic EBL512 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01457
31.2
Action
"Access"
"A"
"A"
Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
Disable or re-enable outputs for routing
equipment (H8/S1)
Outputs for routing equipment (fire brigade tx / fault tx) can be
disabled via this menu. They stay disabled, until re-enabled again via
this menu. Can be useful during an installation test period, when only
local alarms are required.
Disabled outputs are indicated by LEDs "Disablements" (L8) and
"Fault / Disablements Fire brigade tx" (L15).
Disabled outputs are listed in menu H4/U1.
Text in display
Disable or re-enable outputs for
routing equipment
Routing equipment for FIRE:1, FAULT:1
(1=enabled, 0=disabled)
Disable or re-enable outputs for
routing equipment
ACCEPT?
ACCEPT?
ACCEPT?
142
Comments
According to chapter
"Access code for
maintenance", see page
141.
S1
To move the cursor, press
"". Edit and/or press "A"
to accept.
Scroll or press "Return" to
S1
return to H8. Scroll or
press "Return" to log off.