Concluding Steps - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

Power supply unit (PSU)
I
Make sure that the hot-plug PSU engages correctly in the bay and is
locked in position. This is the only way to prevent the PSU from sliding
out of its bay and being damaged during transportation.
6.2.4

Concluding steps

Perform the following procedures:
"Connecting the power cord" on page
Ê
Ê Only when replacing a hot-plug PSU in a non-redundant configuration:
"Switching on the server node(s)" on page
86 Upgrade and Maintenance Manual
71.
72.
CX400 M4