Installing The Cable Management Arm (Cma) - Fujitsu PRIMERGY CX400 M4 Upgrade And Maintenance Manual

4.12

Installing the cable management arm (CMA)

Figure 31: Installing the CMA (A)
Ê Slide the CMA connector outer rail onto the end of the outer rail of the rack
mounting kit until it clicks into place (see arrow).
Figure 32: Installing the CMA (B)
Ê Slide the CMA connector inner rail onto the end of the inner rail of the rack
mounting kit until it clicks into place.
CX400 M4
Upgrade and Maintenance Manual
Basic hardware procedures
69