Advertisement
Quick Links
PRIMERGY CX420 S1 / CX272 S1
System configurator and order-information guide
January 2014
Contents
Instructions
Configuration diagram
Configurator
0
System software
I
CX420 S1 Basic unit
II
CX272 S1Basic unit
IV Graphics
V
VI Shared drive bay
VIII Onboard SW RAID 0/1, additional HDD access option
X
PRIMERGY Server
Advertisement
Related Manuals for Fujitsu PRIMERGY CX420 S1
Summary of Contents for Fujitsu PRIMERGY CX420 S1
-
Page 1: Table Of Contents
PRIMERGY CX420 S1 / CX272 S1 System configurator and order-information guide January 2014 Contents Instructions Configuration diagram Configurator System software CX420 S1 Basic unit CX272 S1Basic unit III Processor IV Graphics Memory VI Shared drive bay VII OS boot drive bay... - Page 2 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.
- Page 3 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Configuration diagram PRIMERGY CX420 S1 System unit ( I ) with up to 12x 3.5" or 2.5" for shared HDDs plus up to 2x internal HDD per node for OS boot HDDs CX400 S1 3,5"...
-
Page 4: Processor
System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Configuration diagram PRIMERGY CX272 S1 System unit ( I ) with up to 12x 3.5" or 2.5" HDDs for shared HDDs plus 2x internal HDDs for OS boot HDDs... - Page 5 PRIMERGY-Software Configurators and Release Lists PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Start PRIMERGY CX250 S1 / CX270 S1 Section SW Configurator 64 bit (EM64T / IA64) with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM- SW is bound to HW and...
- Page 6 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Start PRIMERGY CX400 S1 Section Basic unit System unit consisting of: * 2U Housing with power supply modules, Rack Rails and HDD cages * Basic units with:...
- Page 7 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Rack version for 19'' racks with PSU included in Base Unit Basic unit with 12x 3,5" HDD cage S26361-K1461-V135 2x 1200W PSU module One 1200W power supply module hot plug...
- Page 8 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 PRIMECENTER Rack Sliding rail 1-hand-mounting RMK - 1 pair consisting of - carrier length variable S26361-F4530-L12 toolless mounting possible Adapter angle PC/DC-Rack, till 50Kg necessary for mounting RMKs in...
- Page 9 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Start PRIMERGY CX272 S1 Section Basic unit CX272 S1 System unit consisting of: * 2U half wide server node (tray & motherboard) for pluggin into CX420 chassis...
- Page 10 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Server node for CX400 S1 2U chassis PSU is part of CX400 S1 Base Unit Basic unit is without CPU and Memory Non fully ocupied configuration is not supported...
- Page 11 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Section Processor There are 2 processor sockets available. The CPU socket is always equipped which can be selected via configurator Two processors with different clock frequencies are not possible A multi-processor operating system is required for a dual-processor system.
- Page 12 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Section Graphics Graphics Controller integrated in BMC Aspeed 2300 (integrated Remote Management Controller): 1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz (1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
- Page 13 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Section Memory - There are 8 memory slots per CPU for max. 128GB RDIMM (8x 16GB dual rank) 32GB UDIMM (8x 4GB) => max. 256GB per node...
- Page 14 4 memory modules connected to Channel A - E on the 1st/2nd CPU (can not be populated by UDIMM or 4R RDIMM memory modules) - See below and next page for a detailed descriptions of the memory configuration supported. Fujitsu Technology Solutions x86 PRIMERGY Server 14 of 21...
- Page 15 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Shared drive Section Up to 12x HDD can be connected to 2x CX272 S1 w/ PSAS CP200i HDDs configuration is done by Windows storage space on Windows OS...
-
Page 16: Os Boot Drive Bay
System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 OS boot Drive bay Section For MegaSR Raid 0/1 up to 2x SATA HDD can be connected to onboard chipset Non hotplug At least one HDD or SSD is always required to install OS... - Page 17 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 VIII Section Onboard SW Raid 0/1, additional Raid options For shared 12x 3.5" or 2.5" HDDs S26361-F3554-E118 Always required! PSAS CP200i HDDs configuration is done by Windows storage space on Windows OS...
-
Page 18: Communication/Network
System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Section Communication / Network 2x Gigabit (Dualport) Ethernet Contr. 2x Gbit LAN on-board. onboard 1x service LAN (either shared or dedicated) Intel LAN I350 (Powerville) ext: 2x RJ 45 connector... - Page 19 System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 E) Fibre Channel over Ethernet Loose Delivery: S26361-F3592-L202 S26361-F3592-E202 10GBit/s CNA Emulex OCe10102 All controllers for the connection of external storage systems are delivered without cables. 2 channel 10GBit/sec CNA For the configuration of external cabling see the configurator for external storage systems.
-
Page 20: System Management Products (Remoteview)
System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Section System Management Products (RemoteView) AST2300 (integrated Remote Management Controller) onboard server management Controller with dedicated 10/100/ Service LAN-port and integrated graphics. Dedicated 10/100 Service LAN-port at the rear side. -
Page 21: Change Report
System configurator and order-information guide PRIMERGY CX420 S1 / CX272 S1 Status 2013-12-30 Change Report Date Order number Changes 2013-12-19 1,200W wide range PSU is available 2013-11-08 Mixed HDD and SSD configuration is allowed for shared HDDs 1,200W PSU supported voltage range updated...