ABB 650 Series Engineering Manual page 46

Section 4
Setting up a project
40
IED Type, IED Versionand IP Address of IED
see Figure 23. It is possible to Cancel the insertion or confirm the configuration
and do the insertion with Finish
IEC09000664 V3 EN
Figure 23: PCM600: IED Setup completion wizard
It is not possible to go back and do any modifications in the setup
complete page. If an error is detected, the insertion has to be canceled
and the IED has to be inserted again.
When the online configuration is completed, it is advised to read the
configuration from the IED to ensure that the IED object in PCM600
has the same configuration data as the physical IED.
1MRK 511 284-UEN A
IEC09000664_3_en.vsd
650 series
Engineering manual