Setting Dnp3 Signal Parameters - ABB 650 Series Engineering Manual

1MRK 511 284-UEN A
9.4
650 series
Engineering manual
IEC08000339 V1 EN
Figure 80: CMT: Marker to indicate changes in the container

Setting DNP3 signal parameters

Two parameters per signal can be set for all signal types:
• The index of the signal
• The class configuration
Procedure to set the index of the signal:
1. Click the two inner arrows to sort signals to another index sequence, or select Set
Index ... from the context menu to move one or a set of signals to another array, see
Figure 81.
IEC08000336 V1 EN
Figure 81: CMT: Context menu in DNP3 window
2. The selection window shows the number of signals selected, see
DNP3 communication engineering
IEC08000339.vsd
IEC08000336.vsd
Section 9
Figure 82.
111