ABB 650 Series Engineering Manual page 23

1MRK 511 284-UEN A
650 series
Engineering manual
• Organizing the bay IEDs in the structure of the substation by defining
voltage levels and bays below the substation. A PCM600 project can have
only one substation.
• Configuring the IED functions (for example protection and control
functions and LHMI functions) by using the Application Configuration
tool.
• Configuring the parameters and setting values for the IED itself and for the
process functionality by using the Parameter Setting tool.
• Drawing single line diagrams and do the link to dynamic process values by
using the Graphical Display Editor tool. The single line diagrams are shown
on the LHMI on the bay IED.
• Configuring connections between the application configuration function
blocks and physical hardware input and outputs by using the Signal Matrix
tool or the Application Configuration tool.
• Communication engineering
• IEC 61850 station communication engineering can be done in two ways,
with a separate tool, IET600 or with the PCM600 built in IEC 61850
configuration tool. PCM600 interacts with IET600 by importing and
exporting SCL files. The built in tool can be used for small projects (about
10 IEDs) including ABB IEDs only.
• Organizing GOOSE messages received and managing the used IO signal is
done by using the Signal Matrix tool.
• Communication engineering for the DNP3 protocol by using the
Communication Management tool.
• Communication engineering for the IEC 60870-5-103 protocol by using
Application Configuration tool and Parameter Setting tool.
• Disturbance record management
• Generating overviews about the available (disturbance) recordings in all
connected protection IEDs by using the Disturbance Handling tool.
• Manually reading the recording files (in COMTRADE format) from the
protection IEDs by using the Disturbance Handling tool or automatically
by using the PCM600 scheduler.
• Managing recording files with the assistance of the Disturbance Handling
tool.
• Creating overview reports of recording file content for fast evaluation with
assistance of the Disturbance Handling tool.
• Service management
• Monitoring selected signals of an IED for commissioning or service
purposes by using the Signal Monitoring tool.
• Listing all actual existing IED internal events by using the Event Viewer
tool.
• Listing all actual pending process events as they are stored in the IED
internal disturbance report event list by using the Event Viewer tool.
Section 2
Engineering tool set
17