Wlan Frequency Band (Access Point) - Siemens SIMATIC NET Configuration Manual

6.1.5.44

wlan frequency band (access point)

Description
With this command, you specify the frequency band for the WLAN interface.
Note
This command is available only in access point mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Syntax
Call up the command with the following parameters:
wlan frequency band { 2.4 | 5 }
The parameters have the following meaning:
Parameter
2.4
5
Result
The frequency band for the WLAN interface is specified.
Further notes
You display the setting with the
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
Description
Frequency band 2.4 GHz
Frequency band 5.2 (4.9; 5.6; 5.8) GHz
show wlan basic <wlan 0/X>
Network structures
Range of values/note
Default setting: WLAN1: 2.4 GHz
command.
6.1 WLAN
195