Adjust The Height Of The Left Hinge; Adjust The Height Of The Right Hinge - Canon H1 Service Manual

5
Adjustment > Adjustment Method (DADF) > Adjusting the Height of the hinge > Adjust the height of the right hinge

■ Adjust the height of the left hinge

1) Adjust the height with the left hinge height adjusting screw.
CAUTION:
Loosen the lock nut before adjustment, and tighten it after adjustment.
• If the front spacer is floating, turn the adjusting screw clockwise to bring the spacer closer
to the glass.
• If only the rear spacer or both front and rear spacers are floating, turn the adjusting screw
counterclockwise to bring the rear spacer closer to the glass.
Hinge height adjusting screw
5 Adjustment > Adjustment Method (DADF) > Adjusting the Height of the hinge > Adjust the height of the right hinge
Lock nut
F-5-9

■ Adjust the height of the right hinge

1) If the height is improper, adjust it with the right hinge adjusting screw.
CAUTION:
Loosen the lock nut before adjustment, and tighten it after adjustment.
• Turning the adjusting screw clockwise reduces the front-right side height of the DADF.
• Turning the adjusting screw counter clockwise increases the front-right side height of the
DADF.
Hinge height adjusting screw
2) Check the height of the left hinge. If the height is inappropriate, adjust it again.
5-9
Lock nut
F-5-10
5-9