Removing The Timing Sensor(Sr4); Removing The Document Set Sensor(Sr5); Removing The Cover Open/Closed Sensor(Sr6) - Canon H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Cover Open/Closed Sensor(SR6)

Removing the Timing Sensor(SR4)

1) Open the feeder cover.
2) Remove the rear cover."Removing the Rear Cover"(page 4-18).
3) Remove the timing sensor.
- Connector 1 pc.
x1

Removing the Document Set Sensor(SR5)

1) Open the feeder cover.
2) Remove the rear cover."Removing the Rear Cover"(page 4-18).
3) Remove the document set sensor
- Connector 1 pc.
x1
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Cover Open/Closed Sensor(SR6)
1) Open the feeder cover.
2) Remove the rear
3) Remove the cover open/closed sensor
F-4-73
F-4-74

Removing the Cover Open/Closed Sensor(SR6)

cover."Removing the Rear Cover"(page 4-18).
- Connector 1 pc.
x1
4-32
F-4-75
4-32