Removing The Platen Roller - Canon H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Platen roller

Removing the Platen roller

CAUTION:
When install DADF to a host machine after exchange work, adjustment of eight items is
need.
1) Remove the feed unit."Removing the Feed Unit"(page 4-20).
2) Remove the metal plate
- Screw 3 pcs.
x3
3) Remove the two timing belts.
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Platen roller
F-4-83
F-4-84
4) Remove the resin ring, pulley, gear, E-ring, and bearing.
5) Remove the gear, gear, gear, and bearing.
4-36
F-4-85
F-4-86
4-36