Removing The Led Pcb; Removing The Fan - Canon H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Fan

Removing the LED PCB

1) Open the feeder cover.
2) Open the DADF.
3) Detach the front cover."Removing the Front Cover"(page 4-18).
4) Close the DADF.
5) Remove the LED PCB.
- Screw 1 pc
- Connector 1 pc
x1
x1
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Fan

Removing the Fan

1) Open the feeder cover.
2) Remove the rear
3) Remove the fan
- Screw 1 pc
- Connector 1 pc
F-4-61 CAUTION:
Install the fan with the arrow oriented as shown.
cover."Removing the Rear Cover"(page 4-18).
x1
x1
F-4-63
4-28
F-4-62
4-28