5
Adjustment > Overview (DADF) > Outline
Overview (DADF)
Outline
This machine has the following adjustment items. Carry out each adjustment
after replacing the relevant parts.
Adjustment type
Parts to
replace
Adjusting the Height of the hinget
Hinge
Adj of DADF Tray width
-
Adjusting the Perpendicularity
Hinge
Scan position auto adj in DADF mode
Platen roller
Adj img pstn in DADF mode:horz scan -
Adj of DADF img lead edge margin:
-
front
Fine adj of DADF image magnifictn:
Motor/roller
front
White level adj
Platen roller
CAUTION:
Carry out all the above adjustments after removing the DADF from the reader unit.
5
Adjustment > Overview (DADF) > Outline
Remarks
Reference
Refer to page 5-7
During installation only
Refer to page 5-10
Refer to page 5-10
Refer to page 5-11
During installation only
Refer to page 5-12
During installation only
Refer to page 5-12
Refer to page 5-13
Refer to page 5-13
T-5-4
5-6
5-6