Adjustment Procedure; Adjust The Height Of The Left Hinge; Check The Height Of The Right Hinge; Adjust The Height Of The Right Hinge - Canon D1 Service Manual

5
Adjustment > Adjustment Method (DADF) > Adjusting the Height > Adjust the height of the right hinge

■ Adjustment Procedure

(When the front or rear side is floating)
1) Adjust the left hinge height.
2) Adjust the right hinge height.
3) Adjust or check the left hinge height.
(When both sides are floating)
1) Adjust the left hinge height.
2) Adjust the right hinge height.
3) Adjust the left hinge height.
4) Adjust or check the right hinge height.

■ Adjust the height of the left hinge

1) Adjust the height with the left hinge height adjusting screw.
Caution:
Loosen the lock nut before adjustment, and tighten it after adjustment.
• If the front spacer is floating, turn the adjusting screw clockwise to bring the spacer closer
to the glass.
• If only the rear spacer or both front and rear spacers are floating, turn the adjusting screw
counterclockwise to bring the rear spacer closer to the glass.
Hinge height adjusting screw
5 Adjustment > Adjustment Method (DADF) > Adjusting the Height > Adjust the height of the right hinge
Lock nut
F-5-8

■ Check the height of the right hinge

1) When the DADF is closed, the document hold sheet must be in contact with the
document glass.

■ Adjust the height of the right hinge

1) If the height is improper, adjust it with the right hinge adjusting screw.
Caution:
Loosen the lock nut before adjustment, and tighten it after adjustment.
• Turning the adjusting screw clockwise reduces the front-right side height of the DADF.
• Turning the adjusting screw counter clockwise increases the front-right side height of the
DADF.
Hinge height adjusting screw
2) Check the height of the left hinge. If the height is inappropriate, adjust it again.
5-5
Lock nut
F-5-9
5-5