Removing The Timing Sensor(Sr4); Removing The Document Set Sensor(Sr5); Removing The Cover Open/Closed Sensor(Sr6); Removing The Last Document Detection Sensor(Sr7) - Canon D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Last Document Detection Sensor(SR7)

Removing the Timing Sensor(SR4)

1) Open the feeder cover.
2) Remove the rear cover.("Removing the Rear Cover"(page
3) Remove the timing sensor.
- Connector 1 pc.
x1

Removing the Document Set Sensor(SR5)

1) Open the feeder cover.
2) Remove the rear cover.("Removing the Rear Cover"(page
3) Remove the document set sensor
- Connector 1 pc.
x1
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Last Document Detection Sensor(SR7)
4-13).)
F-4-61
4-13).)
F-4-62

Removing the Cover Open/Closed Sensor(SR6)

1) Open the feeder cover.
2) Remove the rear cover.("Removing the Rear Cover"(page
3) Remove the cover open/closed sensor
- Connector 1 pc.
x1

Removing the Last Document Detection Sensor(SR7)

1) Detach the cover on the reverse side of the document tray.
- Screw 3 pcs.
x3
4-27
4-13).)
F-4-63
F-4-64
4-27