Philips LPC2119 User Manual page 155

Philips Semiconductors
ARM-based Microcontroller
The SPI rate may be calculated as: PCLK rate / SPCCR value. The pclk rate is CCLK / VPB divider rate as determined by the
VPBDIV register contents.
SPI Interrupt Register (S0SPINT - 0xE002001C, S1SPINT - 0xE003001C)
This register contains the interrupt flag for the SPI interface.
Table 120: SPI Interrupt Register (S0SPINT - 0xE002001C, S1SPINT - 0xE003001C)
SPINT Function
0 SPI Interrupt
7:1 Reserved
SPI Interface
SPI interrupt flag. Set by the SPI interface to generate an interrupt. Cleared by writing
a 1 to this bit.
Reserved, user software should not write ones to reserved bits. The value read from
a reserved bit is not defined.
LPC2119/2129/2292/2294
Description
155
Preliminary User Manual
Reset
Value
0
NA
January 08, 2004